Regular Cab, Double Cab Long Deck
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Header Board Upper Rail Installation Nut | M6 (0.24) |
| B, b | Rear End Post Panel Rope Hook Installation Nut | M8 (0.31) |
| C, c | Rear End Post Panel Standard Hole | φ10 (0.39) |
| D, d | Rear Body Side Panel Standard Hole | φ10 (0.39) |
| E, e | Tail Gate Hinge Installation Nut | M8 (0.31) |
| F, f | Rear Body Panel Installation Hole | φ20 (0.79) |
| G, g | Side Panel Top Rail Installation Nut | M6 (0.24) |
| H, h | Rear Body Side Inner Panel Start of Bead Protrusion | - |
| I, i | Side Panel Top Rail Installation Nut | M6 (0.24) |
| J, j | Rear Body Side Inner Panel Start of Bead Protrusion | - |
| *a | Distance between points other than those above | *b | mm
(in.) |
Double Cab Standard Deck
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Header Board Upper Rail Installation Nut | M6 (0.24) |
| B, b | Rear End Post Panel Rope Hook Installation Nut | M8 (0.31) |
| C, c | Rear End Post Panel Standard Hole | φ10 (0.39) |
| D, d | Rear Body Side Panel Standard Hole | φ10 (0.39) |
| E, e | Tail Gate Hinge Installation Nut | M8 (0.31) |
| F, f | Rear Body Panel Installation Hole | φ20 (0.79) |
| G, g | Side Panel Top Rail Installation Nut | M6 (0.24) |
| H, h | Rear Body Side Inner Panel Start of Bead Protrusion | - |
| I, i | Side Panel Top Rail Installation Nut | M6 (0.24) |
| J, j | Rear Body Side Inner Panel Start of Bead Protrusion | - |
| *a | Distance between points other than those above | *b | mm
(in.) |
CrewMax
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Header Board Upper Rail Installation Nut | M6 (0.24) |
| B, b | Rear End Post Panel Rope Hook Installation Nut | M8 (0.31) |
| C, c | Rear End Post Panel Standard Hole | φ10 (0.39) |
| D, d | Rear Body Side Panel Standard Hole | φ10 (0.39) |
| E, e | Tail Gate Hinge Installation Nut | M8 (0.31) |
| F, f | Rear Body Panel Installation Hole | φ20 (0.79) |
| G, g | Side Panel Top Rail Installation Nut | M6 (0.24) |
| H, h | Rear Body Side Inner Panel Start of Bead Protrusion | - |
| I, i | Side Panel Top Rail Installation Nut | M6 (0.24) |
| J, j | Rear Body Side Inner Panel Start of Bead Protrusion | - |
| *a | Distance between points other than those above | *b | mm
(in.) |