Home › General › BODY ELECTRICAL › MULTIPLEX COMMUNICATION
NM27M0U _V1 General _050233 BODY ELECTRICAL _0241755 MULTIPLEX COMMUNICATION UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  MULTIPLEX COMMUNICATION  GENERAL/CONTROL/DETAILS  DIFFERENCES BETWEEN CAN AND BEAN  


GENERAL


a.

The protocols, which are the rules for establishing data communication, differ between the CAN and AVC-LAN. If the ECUs in the networks use different frameworks for their data, such as communication speed, communication wire, and signals, they will be unable to understand each other. Therefore, protocols (rules) must be established among them.

i.

Compared to the AVC-LAN, the CAN features high-speed data transmission. Therefore, the CAN is able to transmit larger amounts of data faster than other protocols. This feature makes it possible to transmit data accurately for the power train and chassis control system, which requires large amounts of data to be transmitted in short periods of time.

Protocol CAN AVC-LAN
HS-CAN MS-CAN
Communication Speed 500 kbps* (Max. 1 M bps) 250 kbps* Max. 17.8 kbps*
Communication Wire Twisted-pair Wire ← ←
Drive Type Differential Voltage Drive ← ←
Data Length 1-8 Byte (Variable) ← 0-32 Byte (Variable)