Home › General › BODY ELECTRICAL › AIR CONDITIONING
NM27M0U _V1 General _050233 BODY ELECTRICAL _0242075 AIR CONDITIONING UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  AIR CONDITIONING  GENERAL/CONTROL/DETAILS  DESCRIPTION  


Description


a.

Manual air conditioning using a left and right independent temperature control is standard equipment on all models except limited grade.


b.

Automatic air conditioning using an up and down and left and right independent temperature control and neural network control is standard equipment on limited grade.


c.

These A/C systems have the following features:

Item Features
Manual and Automatic A/C Common Features The following parts are used to ensure high cooling performance while realizing a compact and lightweight construction.
·

Semi-center Location A/C Unit

·

RS (Revolutionary super-slim Structure) Evaporator

·

SFA (Straight Flow Aluminum)-II Heater Core

·

MF (Multi-Flow)-IV Sub-cool Condenser


A pollen removal type, which has a pollen removal effect, is used as the clean air filter.
The blower control has nine steps to allow precise control.
·

A BUS connector with a built-in IC is used in a lightweight wire harness design to allow a reduced number of wires.

·

The use of this connector means that pulse pattern type servo motors are used.


Manual A/C MAX A/C mode has been adopted to improve cooling performance.
·

After selecting the MAX A/C mode, the A/C compressor is turned on and recirculation/fresh door is automatically moved to re-circulation.


Defroster control logic has been adopted to improve defroster performance.
Automatic A/C The up and down independent temperature control has been adopted to achieve further comfort.
·

The up and down independent temperature control adjusts the difference in temperature of the air blown over the upper body and lower body based on signals from the solar sensor.


Automatic FOOT/DEF mode control has been adopted to improve defroster performance.