General
If the Airbag Sensor Assembly detects a malfunction in the SRS airbag system, the Airbag Sensor Assembly stores the malfunction data in memory, in addition to illuminating the SRS warning light.
The Airbag Sensor Assembly outputs the malfunction data, 5-digit DTCs (Diagnostic Trouble Codes) or 2-digit DTCs, to the hand-held tester, Techstream* or the SRS warning light.
If the Occupant Classification ECU detects a malfunction in the front passenger occupant classification system, the Occupant Classification ECU stores the malfunction data in memory. If the Airbag Sensor Assembly detects a malfunction in the Occupant Classification ECU, the Airbag Sensor Assembly illuminates the SRS warning light and AIRBAG OFF indicator light.
The Occupant Classification ECU outputs 5-digit DTCs to the Techstream.
SRS Airbag System DTCs
There are 2 types of DTCs for the SRS airbag system: 5-digit and 2-digit DTCs.
The 5-digit DTCs can be read after connecting a Techstream to DLC3.
The 2-digit DTCs can be read by connecting the SST (09843-18040) to the TC and CG terminals of DLC3 and reading the blinking of the SRS warning light.
If the SRS airbag deploys, the Airbag Sensor Assembly will turn ON the SRS warning light. However, different from the ordinary diagnosis function, a DTC will not be stored. The SRS warning light cannot be turned OFF. It is necessary to replace the Airbag Sensor Assembly with a new one.
Front Passenger Occupant Classification System DTCs
There are only 5-digit DTCs for the front passenger occupant classification system.
The 5-digit DTCs can be read after connecting a Techstream to DLC3.
For details, refer to the Repair Manual.