General
The airbag manual AUTO-OFF system is used to disable the deployment of the front and side airbags for the front passenger in case that a child seat is installed on the front passenger seat.
The airbag sensor assembly illuminates the AIRBAG ON indicator light or AIRBAG OFF indicator light to inform the driver of this condition.
When the airbag manual AUTO-OFF switch is in the AUTO position, the front passenger classification system determines the operation of the airbags for front passenger.
The front passenger SRS items and indicator lights operate as follows according to the airbag manual AUTO-OFF switch:
| Items | Airbag Manual AUTO-OFF Switch | |||
|---|---|---|---|---|
| AUTO | OFF | Malfunction | ||
| Front Passenger SRS Items | Front Airbag | ●* | - | - |
| Side Airbag | ●* | - | - | |
| Curtain Shield Airbag | ● | ● | ● | |
| Seat Belt Pretensioner | ●* | ●* | ●* | |
| Indicator Light | AIRBAG ON Indicator Light | ON | OFF | OFF |
| AIRBAG OFF Indicator Light | OFF | ON | ON | |
*: The Occupant Classification ECU judges if deployment is necessary.
●: Deploys
-: Does Not Deploy
System Diagram
Airbag Manual AUTO-OFF Switch
The airbag manual AUTO-OFF switch consists of the key cylinder, contact switch, and two resistors. Two resistors are provided to enable the Airbag Sensor Assembly to detect a malfunction in the switch circuit.
Airbag manual AUTO-OFF switch is in the ON Position: Contact Switch is OFF
Airbag manual AUTO-OFF switch is in the OFF Position: Contact Switch is ON