Home › General › ENGINE › 3UR-FBE ENGINE
NM27M0U _V1 General _050231 ENGINE _0242145 3UR-FBE ENGINE UN GENERAL/CONTROL/DETAILS F

ENGINE  3UR-FBE ENGINE  GENERAL/CONTROL/DETAILS  FEATURES OF 3UR-FBE ENGINE  


FEATURES OF 3UR-FBE ENGINE


a.

The 3UR-FBE engine has achieved the following performance features through the use of the items listed below:

(1) High performance and reliability

(2) Low noise and vibration

(3) Lightweight and compact design

(4) Good serviceability

(5) Clean emission and fuel economy


*: Towing package models

Item (1) (2) (3) (4) (5)
Engine Proper A taper squish shape is used for the combustion chamber. ○ - - - ○
An aluminum alloy cylinder block containing an engine coolant distribution pathway is used. ○ - ○ - -
Spiny-type liners are used in the cylinder bores. ○ - ○ - -
Water jacket spacers are used. ○ - - - -
A piston skirt is coated with resin. ○ ○ - - ○
A No. 1 oil pan made of aluminum alloy is used. ○ ○ ○ - -
Valve Mechanism Timing chains and chain tensioners are used. ○ - ○ - -
Hydraulic lash adjusters are used. ○ ○ - ○ ○
Roller rocker arms are used. ○ - - - ○
Lubrication System An oil filter with a replaceable element is used. - - - ○ -
A water-cooled type oil cooler is used.* ○ - - - -
Cooling System TOYOTA Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
Intake and Exhaust System A carbon filter is used in the air cleaner cap. - - - - ○
A linkless-type throttle body is used. ○ - ○ - -
An intake manifold made of plastic is used. ○ - ○ - -
Stainless steel exhaust manifolds are used. ○ - ○ - ○
Ceramic type Three-Way Catalytic converters (TWCs) are used. - - - - ○
Fuel System 12-hole type fuel injectors are used to improve the atomization of fuel. ○ - - - ○
Ignition System The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
Long-reach type iridium-tipped spark plugs are used. ○ - - ○ ○
Charging System A segment conductor type generator is used. ○ - ○ - -
Starting System A planetary reduction type starter is used. - - ○ - -
Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
Blowby Gas Ventilation System A separator case is provided between the cylinder block and the intake manifold. ○ - - - ○
Engine Control System An Magnetic Resistance Element (MRE) type crankshaft position, a camshaft position, and VVT sensors are used. ○ - - - -
The Electronic Throttle Control System- intelligent (ETCS-i) is used. ○ - - - ○
The Dual Variable Valve Timing-intelligent (VVT-i) system is used. ○ - - - ○
The Acoustic Control Induction System (ACIS) is used. ○ - - - ○
An air injection system is used. - - - - ○
A starter control (cranking hold function) is used. ○ - - - -
An evaporative emission control system is used. - - - - ○