DESCRIPTION
The 1UR-FE engine is a 4.6-liter, 32-valve DOHC V8. This engine uses the Dual Variable Valve Timing-intelligent (Dual VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS), Electronic Throttle Control System-intelligent (ETCS-i), air injection system and Exhaust Gas Recirculation (EGR) control. These control functions achieve improved engine performance, fuel economy, and clean emissions.
|
*1: Maximum output and torque ratings are determined by revised SAE J1349 standard. *2: The figure shown is the weight of the part without coolant and oil. |
|||
| No. of Cyls. and Arrangement | 8-cylinder, V Type | ||
| Valve Mechanism | 32-valve DOHC, Chain Drive (with Dual VVT-i) | ||
| Combustion Chamber | Pentroof Type | ||
| Manifolds | Cross-flow | ||
| Fuel System | SFI | ||
| Ignition System | DIS | ||
| Displacement | 4608 cm3 (281.2 cu. in.) | ||
| Bore x Stroke | 94.0 mm x 83.0 mm (3.70 in. x 3.27 in.) | ||
| Compression Ratio | 10.2 : 1 | ||
| Max. Output (SAE-NET)*1 | 231 kW @ 5600 rpm (310 HP @ 5600 rpm) | ||
| Max. Torque (SAE-NET)*1 | 443 N*m @ 3400 rpm (327 ft.*lbf @ 3400 rpm) | ||
| Valve Timing | Intake | Open | -18° to 22° BTDC |
| Closed | 70° to 30° ABDC | ||
| Exhaust | Open | 62° to 30° BBDC | |
| Closed | -8° to 24° ATDC | ||
| Firing Order | 1 - 8 - 7 - 3 - 6 - 5 - 4 - 2 | ||
| Octane Rating | 87 or higher | ||
| Research Octane Number (RON) | 91 or higher | ||
| Tailpipe Emission Regulation | LEVII-ULEV, SFTP | ||
| Evaporative Emission Regulation | LEVII, ORVR | ||
| Engine Service Mass*2 (Reference) | 216.1 (476.5) | ||