Home › General › CHASSIS › A760E / A760F AUTOMATIC TRANSMISSION
NM27M0U _V1 General _050232 CHASSIS _0242207 A760E / A760F AUTOMATIC TRANSMISSION UN GENERAL/CONTROL/DETAILS F

CHASSIS  A760E / A760F AUTOMATIC TRANSMISSION  GENERAL/CONTROL/DETAILS  ATF FILLING PROCEDURE  


ATF Filling Procedure


a.

An ATF filling procedure is used in order to improve the accuracy of the ATF level when the transmission is being repaired or replaced. As a result, the oil filler tube and the oil level gauge used in the conventional automatic transmission have been discontinued, eliminating the need to inspect the fluid level as a part of routine maintenance.

i.

This filling procedure uses a refill plug, an overflow plug, an ATF temperature sensor No. 2, and a D indicator.

X130687C01
2.854,3.073 3.052,2.552 true 1.583,2.802 2.188,2.438 true 0.75,1.521 0.99,1.719 0.24,0.198 10 false *1 2.74,3.073 2.979,3.292 0.24,0.219 10 false *2 1.417,2.75 1.635,2.99 0.219,0.24 10 false *a
*1 Refill Plug *2 Overflow Plug
*a Proper Level - -


HINT:

For details about the ATF filling procedures, refer to the Repair Manual.