Construction
The planetary gear unit consists of 3 planetary gear units, 4 clutches, 4 brakes, and 4 1-way clutches.
A centrifugal fluid pressure canceling mechanism is used in the C1, C2, C3, and C4 clutches applied when shifting 2nd → 3rd, 3rd → 4th, 4th → 5th, and 5th → 6th.
| *1 | No. 3 Clutch (C3) | *2 | No. 2 Clutch (C2) |
| *3 | Input Shaft | *4 | No. 4 Clutch (C4) |
| *5 | No. 4 1-way Clutch (F4) | *6 | No. 2 1-way Clutch (F2) |
| *7 | No. 1 1-way Clutch (F1) | *8 | Front Planetary Gear |
| *9 | Intermediate Shaft | *10 | Center Planetary Gear |
| *11 | No. 3 1-way Clutch (F3) | *12 | Output Shaft |
| *13 | Rear Planetary Gear | *14 | No. 4 Brake (B4) |
| *15 | No. 2 Brake (B2) | *16 | No. 1 Brake (B1) |
| *17 | No. 3 Brake (B3) | *18 | No. 1 Clutch (C1) |
| *1 | Input Shaft | *2 | Intermediate Shaft |
| *3 | Sun Gear | *4 | Front Planetary Gear |
| *5 | Center Planetary Gear | *6 | Rear Planetary Gear |
| *7 | Output Shaft | - | - |
Function of Components
| Component | Function | |
|---|---|---|
| C1 | No. 1 Clutch | Connects the input shaft, F4 and intermediate shaft. |
| C2 | No. 2 Clutch | Connects the input shaft and center planetary carrier. |
| C3 | No. 3 Clutch | Connects the input shaft and sun gear. |
| C4 | No. 4 Clutch | Connects the input shaft and intermediate shaft. |
| B1 | No. 1 Brake | Prevents the front planetary carrier from turning either clockwise or counterclockwise. |
| B2 | No. 2 Brake | Prevents the front and the center ring gears from turning either clockwise or counterclockwise. |
| B3 | No. 3 Brake | Prevents outer race of F2 from turning either clockwise or counterclockwise. |
| B4 | No. 4 Brake | Prevents center planetary carrier and the rear ring gear from turning either clockwise or counterclockwise. |
| F1 | No. 1 1-way Clutch | Prevents the front planetary carrier from turning counterclockwise. |
| F2 | No. 2 1-way Clutch | When B3 is operating, the 1-way clutch prevents the front sun gear from turning counterclockwise. |
| F3 | No. 3 1-way Clutch | Prevents the center planetary carrier and the rear ring gear from turning counterclockwise. |
| F4 | No. 4 1-way Clutch | Prevents the intermediate shaft from turning counterclockwise. |
| Planetary Gears | These gears change the route through which driving force is transmitted, in accordance with the operation of each clutch and brake, in order to increase or reduce the output shaft speed. | |
Transmission Power Flow
| Shift Position or Shift Range | Solenoid Valve | ||||
|---|---|---|---|---|---|
| S1 | S2 | S3 | S4 | ||
|
*: Engine braking occurs |
|||||
| P | - | On | On | - | |
| R* | - | On | On | - | |
| N | - | On | On | - | |
| D, S6 | 1st | - | On | On | - |
| 2nd | On | On | On | - | |
| 3rd | On | - | On | - | |
| 4th* | On | - | - | - | |
| 5th* | On | - | - | On | |
| 6th* | On | On | - | On | |
| S5 | 1st | - | On | On | - |
| 2nd | On | On | On | - | |
| 3rd | On | - | On | - | |
| 4th* | On | - | - | - | |
| 5th* | On | - | - | On | |
| S4 | 1st | - | On | On | - |
| 2nd | On | On | On | - | |
| 3rd | On | - | On | - | |
| 4th* | On | - | - | - | |
| S3 | 1st | - | On | On | - |
| 2nd | On | On | On | - | |
| 3rd* | On | - | On | - | |
| S2 | 1st | - | On | On | - |
| 2nd* | On | On | On | On | |
| S1 | 1st* | - | On | On | - |
| Shift Position or Shift Range | Solenoid Valve | ||||
|---|---|---|---|---|---|
| SR | SL1 | SL2 | SLU | ||
|
*: Engine braking occurs |
|||||
| P | On | - | On | - | |
| R* | On | - | On | - | |
| N | On | On | On | - | |
| D, S6 | 1st | On | - | On | - |
| 2nd | On | - | On | On | |
| 3rd | On | - | On | On | |
| 4th* | On | - | On | On | |
| 5th* | - | On | - | On | |
| 6th* | - | On | - | On | |
| S5 | 1st | On | - | On | - |
| 2nd | On | - | On | On | |
| 3rd | On | - | On | On | |
| 4th* | On | - | On | On | |
| 5th* | - | On | - | On | |
| S4 | 1st | On | - | On | - |
| 2nd | On | - | On | On | |
| 3rd | On | - | On | On | |
| 4th* | On | - | On | On | |
| S3 | 1st | On | - | On | - |
| 2nd | On | - | On | On | |
| 3rd* | On | - | - | On | |
| S2 | 1st | On | - | On | - |
| 2nd* | On | - | - | On | |
| S1 | 1st* | On | - | - | - |
| Shift Position or Shift Range | Clutch | ||||
|---|---|---|---|---|---|
| C1 | C2 | C3 | C4 | ||
|
○: Operates ●: Operates but is not related to power transmission ▲: Operates during engine braking *: Engine braking occurs |
|||||
| P | - | - | - | - | |
| R* | - | - | ○ | - | |
| N | - | - | - | - | |
| D, S6 | 1st | ○ | - | - | - |
| 2nd | ○ | - | - | - | |
| 3rd | ○ | - | ○ | - | |
| 4th* | ○ | ○ | ● | ▲ | |
| 5th* | ● | ○ | ○ | - | |
| 6th* | ● | ○ | - | - | |
| S5 | 1st | ○ | - | - | - |
| 2nd | ○ | - | - | - | |
| 3rd | ○ | - | ○ | - | |
| 4th* | ○ | ○ | ● | ▲ | |
| 5th* | ● | ○ | ○ | - | |
| S4 | 1st | ○ | - | - | - |
| 2nd | ○ | - | - | - | |
| 3rd | ○ | - | ○ | - | |
| 4th* | ○ | ○ | ● | ▲ | |
| S3 | 1st | ○ | - | - | - |
| 2nd | ○ | - | - | - | |
| 3rd* | ○ | - | ○ | ▲ | |
| S2 | 1st | ○ | - | - | - |
| 2nd* | ○ | - | - | ▲ | |
| S1 | 1st* | ○ | - | - | ▲ |
| Shift Position or Shift Range | Brake | ||||
|---|---|---|---|---|---|
| B1 | B2 | B3 | B4 | ||
|
○: Operates ●: Operates but is not related to power transmission ▲: Operates during engine braking *: Engine braking occurs |
|||||
| P | - | - | - | - | |
| R* | ▲ | - | - | ○ | |
| N | - | - | - | - | |
| D, S6 | 1st | - | - | - | - |
| 2nd | - | - | ○ | - | |
| 3rd | - | - | ● | - | |
| 4th* | - | - | ● | - | |
| 5th* | ○ | - | ● | - | |
| 6th* | ● | ○ | ● | - | |
| S5 | 1st | - | - | - | - |
| 2nd | - | - | ○ | - | |
| 3rd | - | - | ● | - | |
| 4th* | - | - | ● | - | |
| 5th* | ○ | - | ● | - | |
| S4 | 1st | - | - | - | - |
| 2nd | - | - | ○ | - | |
| 3rd | - | - | ● | - | |
| 4th* | - | - | ● | - | |
| S3 | 1st | - | - | - | - |
| 2nd | - | - | ○ | - | |
| 3rd* | ▲ | - | ● | - | |
| S2 | 1st | - | - | - | - |
| 2nd* | - | ▲ | ○ | - | |
| S1 | 1st* | - | - | - | ▲ |
| Shift Position or Shift Range | 1-way Clutch | ||||
|---|---|---|---|---|---|
| F1 | F2 | F3 | F4 | ||
|
○: Operates *: Engine braking occurs |
|||||
| P | - | - | - | - | |
| R* | ○ | - | - | - | |
| N | - | - | - | - | |
| D, S6 | 1st | - | - | ○ | ○ |
| 2nd | ○ | ○ | - | ○ | |
| 3rd | ○ | - | - | ○ | |
| 4th* | - | - | - | ○ | |
| 5th* | - | - | - | - | |
| 6th* | - | - | - | - | |
| S5 | 1st | - | - | ○ | ○ |
| 2nd | ○ | ○ | - | ○ | |
| 3rd | ○ | - | - | ○ | |
| 4th* | - | - | - | ○ | |
| 5th* | - | - | - | - | |
| S4 | 1st | - | - | ○ | ○ |
| 2nd | ○ | ○ | - | ○ | |
| 3rd | ○ | - | - | ○ | |
| 4th* | - | - | - | ○ | |
| S3 | 1st | - | - | ○ | ○ |
| 2nd | ○ | ○ | - | ○ | |
| 3rd* | ○ | - | - | ○ | |
| S2 | 1st | - | - | ○ | ○ |
| 2nd* | ○ | ○ | - | ○ | |
| S1 | 1st* | - | - | ○ | ○ |
1st Gear (Shift Lever is in D or S)
|
○: Operates ▲: Operates during engine braking (S1 range) |
|
| C1 | ○ |
| C2 | - |
| C3 | - |
| C4 | ▲ |
| B1 | - |
| B2 | - |
| B3 | - |
| B4 | ▲ |
| F1 | - |
| F2 | - |
| F3 | ○ |
| F4 | ○ |
2nd Gear (Shift Lever is in D or S)
|
○: Operates ▲: Operates during engine braking (S2 range) |
|
| C1 | ○ |
| C2 | - |
| C3 | - |
| C4 | ▲ |
| B1 | - |
| B2 | ▲ |
| B3 | ○ |
| B4 | - |
| F1 | ○ |
| F2 | ○ |
| F3 | - |
| F4 | ○ |
3rd Gear (Shift Lever is in D or S)
|
○: Operates ▲: Operates during engine braking (S3 range) ●: Operates but is not related to power transmission |
|
| C1 | ○ |
| C2 | - |
| C3 | ○ |
| C4 | ▲ |
| B1 | ▲ |
| B2 | - |
| B3 | ● |
| B4 | - |
| F1 | ○ |
| F2 | - |
| F3 | - |
| F4 | ○ |
4th Gear (Shift Lever is in D or S)
|
○: Operates ▲: Operates during engine braking ●: Operates but is not related to power transmission |
|
| C1 | ○ |
| C2 | ○ |
| C3 | ● |
| C4 | ▲ |
| B1 | - |
| B2 | - |
| B3 | ● |
| B4 | - |
| F1 | - |
| F2 | - |
| F3 | - |
| F4 | ○ |
5th Gear (Shift Lever is in D or S)
|
○: Operates ●: Operates but is not related to power transmission |
|
| C1 | ● |
| C2 | ○ |
| C3 | ○ |
| C4 | - |
| B1 | ○ |
| B2 | - |
| B3 | ● |
| B4 | - |
| F1 | - |
| F2 | - |
| F3 | - |
| F4 | - |
6th Gear (Shift Lever is in D or S)
|
○: Operates ●: Operates but is not related to power transmission |
|
| C1 | ● |
| C2 | ○ |
| C3 | - |
| C4 | - |
| B1 | ● |
| B2 | ○ |
| B3 | ● |
| B4 | - |
| F1 | - |
| F2 | - |
| F3 | - |
| F4 | - |
Reverse Gear (Shift Lever is in R)
|
○: Operates ▲: Operates during engine braking |
|
| C1 | - |
| C2 | - |
| C3 | ○ |
| C4 | - |
| B1 | ▲ |
| B2 | - |
| B3 | - |
| B4 | ○ |
| F1 | ○ |
| F2 | - |
| F3 | - |
| F4 | - |
Centrifugal Fluid Pressure Canceling Mechanism
For the following reason, the centrifugal fluid pressure canceling mechanism is used on the C1, C2, C3, and C4 clutches.
Clutch shifting operation is affected not only by the valve body controlling fluid pressure but also by centrifugal fluid pressure that is present due to fluid in the clutch piston oil pressure chamber. The centrifugal fluid pressure canceling mechanism has chamber B to reduce the effect applied to the chamber A. As a result, smooth shifting with excellent response has been achieved.
| *1 | Piston | *2 | Chamber A (for C1) |
| *3 | Chamber A (for C4) | *4 | Chamber B |
| *5 | No. 1 Clutch (C1) | *6 | No. 4 Clutch (C4) |