Home › General › CHASSIS › SUSPENSION AND AXLE
NM27M0U _V1 General _050232 CHASSIS _0242374 SUSPENSION AND AXLE UN GENERAL/CONTROL/DETAILS F

CHASSIS  SUSPENSION AND AXLE  GENERAL/CONTROL/DETAILS  AXLE  


General


a.

Maintenance-free upper and lower ball joints and front axle hub bearings are used. The front axle hub bearings that are used are unit-type double-row tapered roller bearings.


b.

Semi-floating type rear axles are used. A double angular ball bearing type rear axle shaft bearing which offers low rolling resistance is used.


c.

The speed sensor rotors have been integrated in the inner races of the front and rear wheel bearings due to the adoption of active type speed sensors (for the brake control system).

Front Axle
X129504C01
2.021,5.01 2.875,5.104 true 3.615,5.208 5.167,4.844 true 0.781,0.417 1.219,0.698 0.438,0.281 12 false *A: 4.156,0.406 4.594,0.698 0.438,0.292 12 false *B: 1.833,4.885 2.146,5.042 0.313,0.156 10 false *1 5.229,4.708 5.542,4.865 0.313,0.156 10 false *2
*A 4WD Models *B 2WD Models
*1 Sensor Rotor (Bearing Inner Race) *2 Speed Sensor


Rear Axle
X129505C01
1.313,0.833 1.854,1.063 true 2.271,1.708 2.594,2.313 true 1.135,0.698 1.448,0.854 0.313,0.156 10 false *1 2.583,2.302 2.896,2.458 0.313,0.156 10 false *2
*1 Speed Sensor *2 Sensor Rotor (Bearing Inner Race)


HINT:

Speed Sensor Rotor Handling Precautions:

·

Do not allow any iron particles, iron sand, dust, debris, or oil to come in contact with the surface of the speed sensor rotor.

·

Do not place magnetized objects close to the surface of the speed sensor rotor.