GENERAL
The shift control mechanism consists of the shift cable, the shift lever assembly, and the shift lock system.
The shift cable with a length adjustment mechanism is used.
| *1 | Shift Lever Assembly | *2 | Shift Cable |
| *1 | Shift Lever Assembly | *2 | Shift Cable |
The shift control cable is secured by the lock piece of the adjustment mechanism. Adjustment of the shift control cable is possible by releasing the lock piece from the cable. For details, refer to the Repair Manual.
| *1 | Shift Cable | *2 | Lock Piece |
| *3 | Slider | *4 | Shift Control Cable |
| *a | Adjustment Mechanism | *b | Adjustment Mechanism Cross Section |
SHIFT LOCK SYSTEM
General
The shift lock system is controlled by the Shift Lock ECU and it has a key interlock function and shift lock function.
The key interlock function prevents the key from being pulled out after the ignition switch is turned OFF, unless the shift lever is moved to the P position. Thus, parking of the vehicle in the P position is required.
The shift lock function prevents the shift lever from being shifted from P position, unless the ignition switch is ON and the brake pedal is pressed.
The Shift Lock ECU turns the key interlock solenoid and the shift lock solenoid on in order to release the key interlock and shift lock.
A concealed shift lock override button is allows a manual override of the shift lock system if this is necessary.
| *1 | Shift Lever Assembly (Column Shift Only)
·
Shift Lock Solenoid ·
P Detection Switch |
*2 | Stop Light Switch |
| *3 | Ignition Switch
·
Key Interlock Solenoid |
*4 | Shift Lock Control Assembly (Floor Shift Only) |
| *5 | Shift Lock ECU (Column Shift Only) | *6 | Shift Lock Solenoid Assembly
·
Shift Lock Solenoid ·
P Detection Switch |
| *7 | Shift Lock ECU | - | - |