Home › General › CHASSIS › AB60E / AB60F AUTOMATIC TRANSMISSION
NM27M0U _V1 General _050232 CHASSIS _0242499 AB60E / AB60F AUTOMATIC TRANSMISSION UN GENERAL/CONTROL/DETAILS F

CHASSIS  AB60E / AB60F AUTOMATIC TRANSMISSION  GENERAL/CONTROL/DETAILS  ATF FILLING PROCEDURE  


ATF FILLING PROCEDURE


a.

An ATF filling procedure is used in order to improve the accuracy of the ATF level when the transmission is being repaired or replaced. As a result, the oil filler tube and the oil level gauge used in the conventional automatic transmission have been discontinued, eliminating the need to inspect the fluid level as a part of routine maintenance.

i.

This filling procedure uses a refill plug, overflow plug, ATF temperature sensor No.2, and shift position indicator light "D".


ii.

ATF filling procedures are different for models with an ATF cooler and without an ATF cooler.

AB60E Automatic Transmission
X131612C01
0.74,3.26 0.948,2.5 true 4.667,3.292 4.208,2.708 true 1.302,1.448 1.615,1.646 0.313,0.198 10 false *1 0.625,3.25 0.938,3.448 0.313,0.198 10 false *a 4.656,3.323 4.969,3.521 0.313,0.198 10 false *2
*1 Refill Plug *2 Overflow Plug
*a Proper Level in ATF Filling Mode - -


AB60F Automatic Transmission
X131614C01
0.781,3.344 0.938,2.5 true 4.219,2.708 4.781,3.24 true 1.313,1.469 1.625,1.667 0.313,0.198 10 false *1 0.677,3.354 0.99,3.552 0.313,0.198 10 false *a 4.792,3.25 5.104,3.448 0.313,0.198 10 false *2
*1 Refill Plug *2 Overflow Plug
*a Proper Level in ATF Filling Mode - -