General
During nighttime driving, if a large difference in intensity exists between the surrounding light and the light reflected off the inside rear view mirror from the headlights behind, an automatic glare-resistantEC (Electrochromic) mirror automatically reduces the reflection rate of the inside or outside rear view mirrors and thus dampens the glare from the mirror.
This system uses two sensors the (surrounding light detection sensor and the rear light detection sensor) that are present in the inside rear view mirror to detect the difference between the intensity of light in the environment and the light that the inside rear view mirror receives from the rear of the vehicle.
When the ignition switch is turned from OFF to ON, this system defaults to AUTO ON mode.
System Diagram
| *A | For Limited and Platinum Grades | - | - |
| *1 | Inside Rear View Mirror | *2 | EC Mirror Cell |
| *3 | LED | *4 | Rear Light Detection Sensor |
| *5 | EC ON/OFF Switch | *6 | Surrounding Light Detection Sensor |
| *7 | Outside Rear View Mirror LH
·
EC Mirror Cell |
*8 | Outside Rear View Mirror RH
·
EC Mirror Cell |
Function of Main Components
| Component | Function |
|---|---|
| Surrounding Light Detection Sensor | Detects the intensity of the light surrounding the vehicle. |
| Rear Light Detection Sensor | Detects the intensity of the light that strikes the inside rear view mirror from behind the vehicle. |
| LED | Turns on to inform the driver when the AUTO mode is operating. |
| EC ON/OFF Switch | Selects or disables AUTO ON/OFF mode. |
| EC Mirror Cell | Varies the refection rate of the mirrors using the function of the EC elements. |
EC Mirror Cell
An EC mirror cell consists of 2 layers of glasses, which sandwich the EC (Electrochromic) elements in the middle. The EC elements control their color changing characteristics through their electro-chemicaloxidation reduction reaction. These characteristics are utilized to electronically vary the mirror's reflection rate.
| *1 | Glass | *2 | EC Elements |
Reflection Rate Control
A CPU detects the surrounding light using its surrounding light detection sensor, the light from the rear using its rear light detection sensor, and determines whether it is day or night based on the intensity of the surrounding light. At the same time, the intensity of the glare from the rear is determined through the difference in intensity between the surrounding light and rear light. In accordance with the intensity of the rear light, the reflection rate is varied steplessly.