Home › General › NEW MODEL OUTLINE › PERFORMANCE
NM27M0U _V1 General _050229 NEW MODEL OUTLINE _0249813 PERFORMANCE UN GENERAL/CONTROL/DETAILS F

NEW MODEL OUTLINE  PERFORMANCE  GENERAL/CONTROL/DETAILS  PERFORMANCE  


OUTLINE


a.

1UR-FE Engine

i.

The 1UR-FE engine is a 4.6-liter, 32-valve DOHC V8. This engine uses the Dual Variable Valve Timing-intelligent (Dual VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS), Electronic Throttle Control System-intelligent (ETCS-i), air injection system and Exhaust Gas Recirculation (EGR) control. These control functions achieve improved engine performance, fuel economy, and clean emissions.

V115959

Engine Type 1UR-FE
Item No. of Cyls. and Arrangement 8-cylinder, V Type
Valve Mechanism 32-valve DOHC, Chain Drive (with Dual VVT-i)
Fuel System SFI
Displacement 4608 cm3 (281.2 cu. in.)
Max. Output [SAE-NET]* 231 kW @ 5600 rpm (310 HP @ 5600 rpm)
Max. Torque [SAE-NET]* 443 N*m @ 3400 rpm (327 ft*lbf @ 3400 rpm)

HINT:

*:Maximum output and torque ratings are determined by revised SAE J1349 standard.




b.

3UR-FE Engine

i.

The 3UR-FE engine is a 5.7-liter, 32-valve DOHC V8. This engine uses the Dual VVT-i (Variable Valve Timing-intelligent) system, DIS (Direct Ignition System), ACIS (Acoustic Control Induction System), ETCS-i (Electronic Throttle Control System-intelligent), and AI (Air Injection) system. These control functions achieve improved engine performance, fuel economy, and clean emissions.

V115960

Engine Type 3UR-FE
Item No. of Cyls. and Arrangement 8-cylinder, V Type
Valve Mechanism 32-valve DOHC, Chain Drive (with Dual VVT-i)
Fuel System SFI
Displacement 5663 cm3 (345.6 cu. in.)
Max. Output [SAE-NET]* 284 kW @ 5600 rpm (381 HP @ 5600 rpm)
Max. Torque [SAE-NET]* 544 N*m @ 3600 rpm (401 ft*lbf @ 3600 rpm)

HINT:

*:Maximum output and torque ratings are determined by revised SAE J1349 standard.




c.

3UR-FBE Engine

i.

The 3UR-FBE engine, which has been developed based on the 3UR-FE engine, can run on gasoline/ethanol mixed fuel from 0% ethanol (E0) up to 85% ethanol (E85).


ii.

The 3UR-FBE engine is a 5.7-liter, 32-valve DOHC V8. This engine uses the Dual VVT-i (Variable Valve Timing-intelligent) system, DIS (Direct Ignition System), ACIS (Acoustic Control Induction System), ETCS-i (Electronic Throttle Control System-intelligent), and air injection system. These control functions improve engine performance, fuel economy, and clean emissions.


iii.

The following has been achieved by using alcohol fuel as an alternative to gasoline for environmental friendliness.

·

CO and soot in emission gas has been reduced.

·

The amount of sulfur accumulated in the catalytic converter has been reduced because alcohol fuel contains a smaller amount of sulfur. As a result, the durability of the catalytic converter has been improved.


V115960

Engine Type 3UR-FBE
Item No. of Cyls. and Arrangement 8-cylinder, V Type
Valve Mechanism 32-valve DOHC, Chain Drive (with Dual VVT-i)
Fuel System SFI
Displacement 5663 cm3 (345.6 cu. in.)
Max. Output [SAE-NET]* 284 kW @ 5600 rpm (381 HP @ 5600 rpm)
Max. Torque [SAE-NET]* 544 N*m @ 3600 rpm (401 ft*lbf @ 3600 rpm)

HINT:

*:Maximum output and torque ratings are determined by revised SAE J1349 standard.




d.

Multi-mode Automatic Transmission

i.

The multi-mode automatic transmission is used all models.

·

The multi-mode automatic transmission for column shift enables manual shifting by changing shift ranges using the transmission control switch up (+) or down (-) in the S position.

V115965C01
3.365,2.219 3.729,1.75 true 2.833,0.385 3.104,0.667 0.271,0.281 10 false *1 3.229,2.198 3.458,2.448 0.229,0.25 10 false *2 5.844,2.24 6.104,2.479 0.26,0.24 10 false *a
*1 Column Shift Lever *2 Transmission Control Switch
*a Shift Pattern - -


·

The multi-mode automatic transmission for floor shift enables manual shifting by changing shift ranges using the floor shift lever up (+) or down (-) in the S position.

V115966C01
3.281,0.385 3.573,0.688 0.292,0.302 10 false *1 4.771,2.333 5.031,2.563 0.26,0.229 10 false *a
*1 Floor Shift Lever - -
*a Shift Pattern - -





e.

Automatic Transmission

i.

The A760E 6-speed Super Electronic Controlled Transmission (Super ECT) is used on the 2WD models with 1UR-FE engine.


ii.

The A760F 6-speed Super Electronic Controlled Transmission (Super ECT) is used on the 4WD models with 1UR-FE engine.

V115961C01
1.51,0.219 1.802,0.469 0.292,0.25 10 false *1 1.521,2.583 1.823,2.885 0.302,0.302 10 false *2
*1 A760E Automatic Transmission *2 A760F Automatic Transmission


Combination with Engine 1UR-FE
Transmission Type A760E (2WD) A760F (4WD)
Gear Ratio 1st 3.520 3.520
2nd 2.042 2.042
3rd 1.400 1.400
4th 1.000 1.000
5th 0.716 0.716
6th 0.586 0.586
Reverse 3.224 3.224


iii.

The AB60E 6-speed Super Electronic Controlled Transmission (Super ECT) is used on the 2WD models with 3UR-FE and 3UR-FBE engine.


iv.

The AB60F 6-speed Super Electronic Controlled Transmission (Super ECT) is used on the 4WD models with 3UR-FE and 3UR-FBE engine.

V115962C01
1.542,0.229 1.823,0.469 0.281,0.24 10 false *1 1.583,2.573 1.833,2.823 0.25,0.25 10 false *2
*1 AB60E Automatic Transmission *2 AB60F Automatic Transmission


Combination with Engine 3UR-FE or 3UR-FBE
Transmission Type AB60E (2WD) AB60F (4WD)
Gear Ratio 1st 3.333 3.333
2nd 1.960 1.960
3rd 1.353 1.353
4th 1.000 1.000
5th 0.728 0.728
6th 0.588 0.588
Reverse 3.061 3.061



f.

Transfer (4WD Models)

i.

A compact and lightweight part-time 2-speed WF1AM transfer is provided for 4WD models.


ii.

This transfer uses a one-touch 2-4 select system, enabling the driver to switch between 2WD, 4H and 4L modes by turning the 4WD control switch.


iii.

The 4WD control system uses the 4WD control ECU to actuate and control the electromagnetic clutch-type synchromesh mechanism, the transfer shift actuator and the Automatic Disconnecting Differential (A.D.D.) shift actuator.


iv.

The 4WD control switch is used to transmit drive torque to the front and to change the transfer gear ratio.

V115963

Transfer Type WF1AM
Combination with Transmission A760F/AB60F
Gear Ratio 2WD/4H 1.000
4L 2.640
Automatic Disconnecting Differential (A.D.D.) With



g.

Differential

i.

Front Differential

*: Towing Package Models

Combination with Engine 1UR-FE 3UR-FE or 3UR-FBE
Type SD22AD SD22AD
Gear Ratio 3.909 4.100, 4.300*
Ring Gear Size 220 mm (8.7 in.) 220 mm (8.7 in.)


ii.

Rear Differential

*: Towing Package Models

Combination with Engine 1UR-FE 3UR-FE or 3UR-FBE
Type BD24B BD26B
Gear Ratio 3.909 4.100, 4.300*
Ring Gear Size 241 mm (9.5 in.) 267 mm (10.5 in.)



h.

Suspension

i.

A double-wishbone type independent suspension is used for the front suspension.


ii.

A rigid suspension with leaf springs is used for the rear suspension.


iii.

A Bilstein made shock absorber is available as an option for offroad package models.

V115964



i.

Brake

*1: Diameter x Thickness

*2: These functions operate while in 2WD mode.

*3: This function only uses brakes to perform traction control.

Front Brake Type Ventilated Disc
Rotor Size (D X T)*1 354 X 32 mm (13.9 X 1.26 in.)
Rear Brake Type Ventilated Disc
Rotor Size (D X T)*1 345 X 18 mm (13.6 X 0.71 in.)
Brake Booster Active Brake Booster
Brake Control System 2WD ABS with EBD, Brake Assist, TRAC, AUTO LSD, VSC, Trailer Sway Control
4WD ABS with EBD, Brake Assist, TRAC*2, A-TRAC*3, AUTO LSD*2, VSC, Trailer Sway Control


j.

Steering

i.

A rack and pinion type steering gear is used.


ii.

A hydraulic power steering is used.


iii.

For SR5 grade models, a manual tilt mechanism as standard (Regular Cab, Double cab and CrewMax), a manual tilt and telescopic mechanism is optional (Double cab and CrewMax).


iv.

For Limited grade models, a manual tilt and telescopic mechanism is standard.


v.

For Platinum grade models, a power tilt and telescopic mechanism is standard.