Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › MASS AIR FLOW METER
RM27M0U _51 Engine / Hybrid System _049094 3UR-FE ENGINE CONTROL _0233911 MASS AIR FLOW METER G

3UR-FE ENGINE CONTROL  MASS AIR FLOW METER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22204 1.CHECK MASS AIR FLOW METER

a.

Check the mass air flow value.

i.

Connect the Techstream to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Push the Techstream main switch ON.


iv.

Enter the following menus:

Select: Powertrain / Engine / Data List / All Data / MAF.


v.
A165593E01
0.96,1.424 1.179,1.588 0.219,0.164 10 Air

Blow air into the MAF meter, and check that the MAF value fluctuates.

If the result is not as specified, check the MAF meter (see page Engine / Hybrid System>3UR-FE ENGINE CONTROL>MASS AIR FLOW METER>INSPECTION), or wiring and ECM (see page Engine / Hybrid System>3UR-FE ENGINE CONTROL>SFI SYSTEM>P0102).