Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › ACCELERATOR PEDAL
RM27M0U _51 Engine / Hybrid System _049094 3UR-FE ENGINE CONTROL _0233922 ACCELERATOR PEDAL A

3UR-FE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 1.REMOVE ACCELERATOR PEDAL ROD ASSEMBLY

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal rod assembly.

If applied, the accelerator pedal rod assembly must be replaced.


a.
A153493

Disconnect the accelerator pedal position sensor connector.


b.

Remove the 2 nuts and accelerator pedal rod.