83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
2.REMOVE SUB TANK
Disconnect the fuel pump connector.
Using a small screwdriver, detach the claw on the end of the tube from the claw hole. Disconnect the tube from the 2 clamps.
Disconnect the fuel tube.
Using a screwdriver, detach the 3 claws from the claw holes.
Tape the screwdriver tip before use.
Using a screwdriver, detach the 2 claws from the claw holes and remove the sub tank.
Tape the screwdriver tip before use.
Do not damage the fuel sub tank.
3.REMOVE FUEL PUMP
Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the suction plate with filter.
Tape the screwdriver tip before use.
Remove the fuel pump harness.
Remove the O-ring and spacer from the fuel pump.