Home › Engine / Hybrid System › 3UR-FE EMISSION CONTROL › AIR SWITCHING VALVE
RM27M0U _51 Engine / Hybrid System _049100 3UR-FE EMISSION CONTROL _0233982 AIR SWITCHING VALVE G

3UR-FE EMISSION CONTROL  AIR SWITCHING VALVE  INSPECTION  


PROCEDURE

Hide 25710 1.INSPECT AIR SWITCHING VALVE ASSEMBLY

a.
A158642

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 5 20°C (68°F)* 4.5 to 5.5 Ω
1 - Body ground Always 1 MΩ or higher
5 - Body ground


HINT:

*: Make sure that the air switching valve is at ambient temperature before measuring the resistance.


NOTICE:

When applying voltage, do not touch terminals 2, 3 and 4.


If the result is not as specified, replace the air switching valve assembly.


b.
U151448E02
0.792,2.646 0.792,3.01 false 1.885,2.469 1.885,3.073 false 2.729,1.927 2.729,2.542 false 2.792,1.406 3.094,1.406 false 2.198,2.635 2.438,2.813 0.24,0.177 10 false Air 2.938,2.021 3.177,2.198 0.24,0.177 10 false Air 1.854,3.094 2.01,3.26 0.156,0.167 10 false A 0.74,3.031 0.896,3.198 0.156,0.167 10 false B 3.167,1.313 3.323,1.479 0.156,0.167 10 false B 2.688,2.563 2.844,2.729 0.156,0.167 10 false A

Check the operation of the air switching valve.

i.

Check that air does not flow from port A to port B.

NOTICE:

Make sure the applied pressure is 30 kPa (0.3 kgf/cm2, 4.4 psi) or less


If the result is not as specified, replace the air switching valve assembly.


ii.
U151449E02
0.76,4.25 0.76,4.385 true 1.854,4.052 1.854,4.385 false 2.698,3.49 2.698,3.833 false 2.802,3 2.969,3 false 2.906,3.604 3.115,3.771 0.208,0.167 10 false Air 2.104,4.229 2.313,4.396 0.208,0.167 10 false Air 1.823,4.417 1.979,4.583 0.156,0.167 10 false A 0.719,4.427 0.875,4.594 0.156,0.167 10 false B 2.656,3.865 2.813,4.031 0.156,0.167 10 false A 3.042,2.906 3.198,3.073 0.156,0.167 10 false B

Apply battery voltage across terminals 1 and 5.

NOTICE:

When applying voltage, do not touch terminals 2, 3 and 4.



iii.

Check that air flows from port A to port B.

If the result is not as specified, replace the air switching valve assembly.