Home › Engine / Hybrid System › 3UR-FE EXHAUST › EXHAUST PIPE
RM27M0U _51 Engine / Hybrid System _049109 3UR-FE EXHAUST _0234047 EXHAUST PIPE A

3UR-FE EXHAUST  EXHAUST PIPE  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 2)

a.

Install the 4 No. 1 converter protector stays to the front exhaust pipe assembly.


b.

Install the lower No. 1 monolithic converter protector and upper No. 1 monolithic converter protector with the 4 bolts and 4 nuts.

Torque:
11 N*m (107 kgf*cm, 8 ft.*lbf)

HINT:
A306320E01
1.655,0.047 1.840,0.202 0.185,0.155 10 *a 0.491,1.076 0.676,1.231 0.185,0.155 10 *b 2.689,1.444 2.873,1.599 0.185,0.155 10 *c

Install the No. 1 monolithic converter protector within the angle range specified in the illustration.


Text in Illustration
*a Top
*b LH Side of Vehicle
*c 33.7 to 41.7°


Hide 2.INSTALL MONOLITHIC CONVERTER PROTECTOR (for Bank 2)

a.

Install the 2 No. 1 converter protector stays and 2 No. 2 converter protector stays to the front exhaust pipe assembly.


b.

Install the lower monolithic converter protector and upper monolithic converter protector with the 4 bolts and 4 nuts.

Torque:
11 N*m (107 kgf*cm, 8 ft.*lbf)

HINT:
A306319E01
1.667,0.053 1.852,0.208 0.185,0.155 10 *a 0.279,1.08 0.464,1.235 0.185,0.155 10 *b 0.616,1.26 0.801,1.415 0.185,0.155 10 *c

Install the monolithic converter protector within the angle range specified in the illustration.


Text in Illustration
*a Top
*b LH Side of Vehicle
*c -2.6 to 5.4°


Hide 18436 3.INSTALL NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 1)

a.

Install the 4 No. 1 converter protector stays to the front No. 2 exhaust pipe assembly.


b.

Install the lower No. 1 monolithic converter protector and upper No. 1 monolithic converter protector with the 4 bolts and 4 nuts.

Torque:
11 N*m (107 kgf*cm, 8 ft.*lbf)

HINT:
A307752E01
1.649,0.044 1.834,0.199 0.185,0.155 10 *a 0.501,1.073 0.685,1.228 0.185,0.155 10 *b 2.649,1.535 2.833,1.690 0.185,0.155 10 *c

Install the No. 1 monolithic converter protector within the angle range specified in the illustration.


Text in Illustration
*a Top
*b LH Side of Vehicle
*c 45.5 to 53.5°


Hide 18435A 4.INSTALL MONOLITHIC CONVERTER PROTECTOR (for Bank 1)

a.

Install the 2 No. 1 converter protector stays and 2 No. 2 converter protector stays to the front No. 2 exhaust pipe assembly.


b.

Install the lower monolithic converter protector and upper monolithic converter protector with the 4 bolts and 4 nuts.

Torque:
11 N*m (107 kgf*cm, 8 ft.*lbf)

HINT:
A306321E01
1.653,0.042 1.838,0.196 0.185,0.155 10 *a 0.503,1.077 0.688,1.232 0.185,0.155 10 *b 2.732,1.267 2.917,1.422 0.185,0.155 10 *c

Install the monolithic converter protector within the angle range specified in the illustration.


Text in Illustration
*a Top
*b LH Side of Vehicle
*c 16.3 to 24.3°