Home › Engine / Hybrid System › 3UR-FBE EXHAUST › EXHAUST PIPE
RM27M0U _51 Engine / Hybrid System _049110 3UR-FBE EXHAUST _0234049 EXHAUST PIPE A

3UR-FBE EXHAUST  EXHAUST PIPE  DISASSEMBLY  


PROCEDURE

Hide 18435A 1.REMOVE MONOLITHIC CONVERTER PROTECTOR (for Bank 1)

a.

Remove the 4 bolts, 4 nuts, lower monolithic converter protector, upper monolithic converter protector, 2 No. 1 converter protector stays and 2 No. 2 converter protector stays from the front No. 2 exhaust pipe assembly.


Hide 18436 2.REMOVE NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 1)

a.

Remove the 4 bolts, 4 nuts, lower No. 1 monolithic converter protector, upper No. 1 monolithic converter protector and 4 No. 1 converter protector stays from the front No. 2 exhaust pipe assembly.


Hide 3.REMOVE MONOLITHIC CONVERTER PROTECTOR (for Bank 2)

a.

Remove the 4 bolts, 4 nuts, lower monolithic converter protector, upper monolithic converter protector, 2 No. 1 converter protector stays and 2 No. 2 converter protector stays from the front exhaust pipe assembly.


Hide 4.REMOVE NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 2)

a.

Remove the 4 bolts, 4 nuts, lower No. 1 monolithic converter protector, upper No. 1 monolithic converter protector and 4 No. 1 converter protector stays from the front exhaust pipe assembly.