Home › Engine / Hybrid System › 1UR-FE LUBRICATION › OIL PRESSURE SWITCH
RM27M0U _51 Engine / Hybrid System _049115 1UR-FE LUBRICATION _0234075 OIL PRESSURE SWITCH G

1UR-FE LUBRICATION  OIL PRESSURE SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 83520 1.INSPECT OIL PRESSURE SENDER GAUGE ASSEMBLY

a.
A163798E09
1.635,1.073 2.146,1.125 false 1.063,2 1.677,2.188 0.615,0.188 10 false Test LED 0.094,0 2.615,0.365 2.521,0.365 10 false Component without harness connected: (Oil Pressure Sender Gauge) 2.208,1.063 2.323,1.24 0.115,0.177 10 false 1

Disconnect the sender gauge connector.


b.

Apply battery positive (+) voltage to the sender gauge terminal through a test LED.


c.

Check that the LED does not illuminate when the engine is stopped.


d.

Check that the LED flashes when the engine is running. The number of flashes varies with engine speed.

If the operation is not as specified, replace the oil pressure sender gauge assembly.