Home › Drivetrain › TIRE AND WHEEL › TIRE PRESSURE WARNING RESET SWITCH
RM27M0U _52 Drivetrain _049120 TIRE AND WHEEL _0234093 TIRE PRESSURE WARNING RESET SWITCH G

TIRE AND WHEEL  TIRE PRESSURE WARNING RESET SWITCH  INSPECTION  


PROCEDURE

Hide 84746A 1.CHECK TIRE PRESSURE WARNING RESET SWITCH

a.
C158396E11
2.667,2.406 2.552,2.771 false 2.938,2.406 3.052,2.771 false 0.167,0.208 2.646,0.677 2.479,0.469 10 false Component without harness connected: (Tire Pressure Warning Reset Switch) 1.531,2.344 1.771,2.531 0.24,0.188 10 false ON 1.521,2.917 1.906,3.115 0.385,0.198 10 false OFF 2.479,2.823 2.667,2.99 0.188,0.167 10 false 2 3.042,2.823 3.25,3 0.208,0.177 10 false 1

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 ON (Switch is pressed and held) Below 1 Ω
OFF (Switch is not pressed) 10 kΩ or higher


If the result is not as specified, replace the tire pressure warning reset switch.