Home › Engine / Hybrid System › DIFFERENTIAL › DIFFERENTIAL OIL
RM27M0U _51 Engine / Hybrid System _049121 DIFFERENTIAL _0234096 DIFFERENTIAL OIL A

DIFFERENTIAL  DIFFERENTIAL OIL  REPLACEMENT  


PROCEDURE

Hide 1.DRAIN DIFFERENTIAL OIL

a.

Stop the vehicle on a level place.


b.

for Front Differential:

i.

Using a 10 mm hexagon wrench, remove the filler plug and gasket.


ii.

Using a 10 mm hexagon wrench, remove the drain plug and gasket, and drain the oil.


iii.

Using a 10 mm hexagon wrench, install a new gasket and the drain plug.

Torque:
39 N*m (400 kgf*cm, 29 ft.*lbf)



c.

for Rear Differential:

i.

Remove the filler plug and gasket.


ii.

Remove the drain plug and gasket, and drain the oil.


iii.

Install a new gasket and the drain plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)



Hide 2.ADD DIFFERENTIAL OIL

a.
D025304E54
0.698,1.344 0.958,1.583 0.26,0.24 10 false *a

Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the differential filler plug hole.

Text in Illustration
*a 0 to 5 mm (0 to 0.196 in.)

NOTICE:
·

Too much or too little oil will lead to differential problems.

·

After changing the oil, drive the vehicle and then check the oil level again.



Oil type:
Item Oil type and viscosity
Front differential Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent.
Rear differential


Front differential capacity:
Specified Condition
2.00 to 2.10 liters (2.12 to 2.21 US qts., 1.76 to 1.84 Imp. qts.)


Rear differential capacity:
Engine type Wheelbase type Cab type Drive type Specified Condition
3UR-FE. 3UR-FBE 3220 mm (10 ft. 6.8 in.) Regular 2WD 3.45 to 3.55 liters (3.65 to 3.75 US qts., 3.04 to 3.12 Imp. qts.)
4WD
3700 mm (12 ft. 1.7 in.) Regular 2WD 3.55 to 3.65 liters (3.76 to 3.85 US qts., 3.13 to 3.21 Imp. qts.)
4WD
Double 2WD
4WD
CrewMax 2WD 3.70 to 3.80 liters (3.91 to 4.01 US qts., 3.26 to 3.34 Imp. qts.)
4WD 3.55 to 3.65 liters (3.76 to 3.85 US qts., 3.13 to 3.21 Imp. qts.)
4180 mm (13 ft. 8.6 in.) Double 2WD 3.70 to 3.80 liters (3.91 to 4.01 US qts., 3.26 to 3.34 Imp. qts.)
4WD
1UR-FE 3220 mm (10 ft. 6.8 in.) Regular 2WD 4.00 to 4.10 liters (4.23 to 4.33 US qts., 3.52 to 3.60 Imp. qts.)
4WD
3700 mm (12 ft. 1.7 in.) ALL 2WD 4.55 to 4.65 liters (4.81 to 4.91 US qts., 4.01 to 4.09 Imp. qts.)
4WD
4180 mm (13 ft. 8.6 in.) 2WD
4WD



b.

for Rear Differential:

i.

Install a new gasket and the filler plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)



c.

for Front Differential:

i.

Using a 10 mm hexagon wrench, install a new gasket and the filler plug.

Torque:
39 N*m (400 kgf*cm, 29 ft.*lbf)