Home › Brake › BRAKE › REAR BRAKE
RM27M0U _54 Brake _049123 BRAKE _0234119 REAR BRAKE A

BRAKE  REAR BRAKE  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL PISTON SEAL

a.
C191837E03
0.729,2.917 2.75,3.094 2.021,0.177 10 false Lithium soap base glycol grease

Apply a light coat of lithium soap base glycol grease to the entire inner and outer circumference of a new piston seal.


b.

Install the piston seal to the disc brake cylinder.


Hide 2.INSTALL CYLINDER BOOT

a.
C191838E03
0.729,2.917 2.771,3.104 2.042,0.188 10 false Lithium soap base glycol grease

Apply a light coat of lithium soap base glycol grease to the entire inner and outer circumference of a new cylinder boot.


b.

Apply a light coat of lithium soap base glycol grease to the entire outer circumference of the rear disc brake piston where it contacts the rear disc brake cylinder.


c.

Install the cylinder boot to the rear disc brake piston.


d.

Install the rear disc brake piston to the rear disc brake cylinder assembly.


Hide 47731B 3.INSTALL REAR DISC BRAKE PISTON

a.

Install the cylinder boot to the disc brake cylinder.

NOTICE:

Install the boot securely into the groove of the disc brake cylinder.



b.
C155471

Push in the piston by hand and install the cylinder boot into the groove of the piston.

NOTICE:

Install the boot securely into the grooves of the piston.



Hide 47547C 4.INSTALL REAR DISC BRAKE BLEEDER PLUG

Torque:
11 N*m (110 kgf*cm, 8 ft.*lbf)

Hide 31478C 5.INSTALL REAR DISC BRAKE BLEEDER PLUG CAP