Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
42603
1.REMOVE REAR WHEEL
2.DRAIN BRAKE FLUID
Wash off brake fluid immediately if it comes in contact with any painted surface.
47319F
3.REMOVE REAR BRAKE FLEXIBLE HOSE
Disconnect the brake tube from the flexible hose with a union nut wrench while holding the flexible hose with a wrench.
Do not bend or damage the brake tube.
Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.
Remove the clip.
Remove the union bolt and gasket, and then remove the flexible hose from the disc brake cylinder.