Home › Brake › PARKING BRAKE › PARKING BRAKE ASSEMBLY
RM27M0U _54 Brake _049124 PARKING BRAKE _0234124 PARKING BRAKE ASSEMBLY A

PARKING BRAKE  PARKING BRAKE ASSEMBLY  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the LH side and RH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL LH

Hide 2.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

a.
C158344

Remove the 2 bolts and disconnect the rear disc brake cylinder.

NOTICE:
·

Do not disconnect the flexible hose from the disc brake cylinder.

·

Do not twist or bend the flexible hose.




b.

Hang the disc brake cylinder with a piece of wire.


Hide 42431 3.REMOVE REAR DISC

Hide 4.REMOVE PARKING BRAKE SHOE RETURN SPRING

a.
C179358E02
2.844,1.271 2.844,1.531 false 2.708,1.542 3.031,1.698 0.323,0.156 10 false SST

Using SST, remove the return spring.

SST
09703-30011  


Hide 46580 5.REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH

a.
C155124E02
2.792,1.302 2.792,1.563 false 2.625,1.583 2.917,1.74 0.292,0.156 10 false SST

Using SST, remove the shoe hold down spring cup, compression spring and shoe hold down spring pin.

SST
09718-00011  


b.

Disconnect the tension spring.


c.

Remove the No. 1 parking brake shoe and shoe adjuster screw set.


Hide 46590 6.REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

a.
C154249E02
0.729,1.854 0.729,1.615 0.729,1.615 2.021,1.615 false 0.604,1.875 0.896,2.031 0.292,0.156 10 false SST

Using SST, remove the shoe hold down spring cup, compression spring and shoe hold down spring pin.

SST
09718-00011  


b.

Remove the No. 2 parking brake shoe.


Hide 7.REMOVE PARKING BRAKE SHOE LEVER LH

a.
C155125

Disconnect the No. 3 parking brake cable from the parking brake shoe lever.


b.

Remove the parking brake shoe lever.


Hide 46430 8.DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.
C154244

Disconnect the bolt and No. 3 parking brake cable.


Hide 9.REMOVE PARKING BRAKE ANCHOR BLOCK

a.
C155126

Remove the 2 nuts and anchor block.