Home › Brake › PARKING BRAKE › PARKING BRAKE PEDAL
RM27M0U _54 Brake _049124 PARKING BRAKE _0234125 PARKING BRAKE PEDAL A

PARKING BRAKE  PARKING BRAKE PEDAL  INSTALLATION  


PROCEDURE

Hide 46200 1.INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY

a.
C154234

Install the control pedal to the body with the 3 nuts.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)


b.
C157476

Attach the wire harness clamp to the control pedal.


c.

Connect the parking brake switch connector.


Hide 46410 2.CONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY

a.
C155437

Connect the parking brake cable to the control pedal.


b.

Using needle-nose pliers, slowly bend down the claw.

NOTICE:

Be careful not to damage the parking brake cable or claw.



c.
C156829

Install the clip to the control pedal.


d.
C154230

Temporarily install the adjustment nut and lock nut.

HINT:

The nuts will be tightened to a torque specification in the "ADJUST PARKING BRAKE PEDAL TRAVEL" procedure.



Hide 3.CHECK PARKING BRAKE PEDAL TRAVEL

Hide 4.ADJUST PARKING BRAKE PEDAL TRAVEL

Hide 73900 5.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL