84540
1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
·
2 (RB) - 6 (PL) ·
4 (B) - 5 (L) |
Shift lever position on P | Below 1 Ω |
| 2 (RB) - 1 (RL) | Shift lever position on R | Below 1 Ω |
·
2 (RB) - 9 (NL) ·
4 (B) - 5 (L) |
Shift lever position on N | Below 1 Ω |
| 2 (RB) - 7 (DL) | ·
Shift lever position on D ·
Shift lever position on S, "+" or "-" |
Below 1 Ω |
·
2 (RB) - 6 (PL) ·
4 (B) - 5 (L) |
Shift lever position not on P | 10 kΩ or higher |
| 2 (RB) - 1 (RL) | Shift lever position not on R | 10 kΩ or higher |
·
2 (RB) - 9 (NL) ·
4 (B) - 5 (L) |
Shift lever position not on N | 10 kΩ or higher |
| 2 (RB) - 7 (DL) | ·
Shift lever position not on D ·
Shift lever position not on S, "+" or "-" |
10 kΩ or higher |
If the result is not as specified, replace the park/neutral position switch assembly.