Home › Drivetrain › AB60F AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH
RM27M0U _52 Drivetrain _049125 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE _0234130 PARK / NEUTRAL POSITION SWITCH A

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

C161106

a.

Remove the nut and disconnect the cable.


Hide 84540 2.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Disconnect the switch connector.


b.
C161107

Remove the nut, spring washer and transmission control shaft lever RH.


c.
C161108

Using a screwdriver, bend the tabs of the lock washer.


d.
C161109

Remove the lock nut and lock washer.


e.
C161110

Remove the bolt and switch.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.