Home › Drivetrain › AB60F AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY(for Column Shift Type)
RM27M0U _52 Drivetrain _049125 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE _0234134 SHIFT LEVER ASSEMBLY(for Column Shift Type) A

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY(for Column Shift Type)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL COLUMN SHIFT ASSEMBLY

C155886

a.

Using a T30 ''TORX'' wrench, install the column shift with the 3 bolts.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)


b.

Connect the connector and attach the harness clamp.


c.
U152181E05
0.406,0.885 0.219,0.146 0.219,0.146 0.313,0.146 true 0.354,0.063 1.167,0.24 0.813,0.177 10 false Ridged Side

Connect the column shift transmission control cable end to the column shift.

NOTICE:

Make sure to install the cable end so that the inner cable is not twisted. Confirm that the cable end's ridged side is facing upward.



Hide 84140 2.INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY