Home › Drivetrain › AB60F AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY(for Floor Shift Type)
RM27M0U _52 Drivetrain _049125 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE _0234135 SHIFT LEVER ASSEMBLY(for Floor Shift Type) A

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY(for Floor Shift Type)  REASSEMBLY  


PROCEDURE

Hide 85903 1.INSTALL SHIFT LOCK CONTROL ECU

a.

Attach the 3 claws to install the shift lock control ECU to the shift lever assembly.


b.

Connect the shift lock solenoid connector.


Hide 35959A 2.INSTALL POSITION INDICATOR LED

a.

Attach the claw to install the position indicator LED to the lower position indicator housing.


Hide 35906 3.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

a.

Connect the connector and install the indicator light wire sub-assembly to the lower position indicator housing.


Hide 35974 4.INSTALL LOWER POSITION INDICATOR HOUSING

a.
C290573

Attach the 4 claws to install the lower position indicator housing to the shift lever assembly.


Hide 35906 5.CONNECT INDICATOR LIGHT WIRE SUB-ASSEMBLY

a.

Attach the 4 guides.


b.
U152642E01
2.899,1.628 3.054,1.809 0.156,0.181 10 *1 0.102,0.091 0.258,0.272 0.156,0.181 10 *a 0.694,0.457 0.985,0.639 0.291,0.181 10 ILL+ 0.737,1.486 0.993,1.667 0.256,0.181 10 ILL- 1.465,0.982 1.082,0.55 false 1.082,1.594 1.465,1.161 false 2.549,2.332 2.738,1.736 2.738,1.736 2.875,1.736 false

Securely connect the 2 wire terminals to terminals 4 (ILL+) and 8 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.

Text in Illustration
*1 Connector Housing Retainer
*a Component without harness connected
(Transmission Control Switch)


Hide 35976 6.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

a.

Install the No. 2 position indicator slide cover to the position indicator slide cover.


Hide 35975 7.INSTALL POSITION INDICATOR SLIDE COVER

a.

Install the position indicator slide cover with the No. 2 position indicator slide cover to the shift lever assembly.

HINT:

Install the position indicator slide cover so that its mark faces the vehicle front.



Hide 35971A 8.INSTALL UPPER POSITION INDICATOR HOUSING

a.

Attach the 4 claws to install the upper position indicator housing to the shift lever assembly.


Hide 33554 9.INSTALL SHIFT LEVER CAP

a.
C290577

Attach the 2 claws to install the shift lever cap to the shift lever assembly.