Home › Drivetrain › AB60E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY(for Column Shift Type)
RM27M0U _52 Drivetrain _049126 AB60E AUTOMATIC TRANSMISSION / TRANSAXLE _0234151 SHIFT LEVER ASSEMBLY(for Column Shift Type) N

AB60E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY(for Column Shift Type)  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT SHIFT LEVER POSITION

a.

When moving the shift lever from the N position to other positions, check that the lever can be shifted smoothly and accurately to each position and that the position indicator comes on in accordance with the shift lever position.

If the indicator and shift lever position do not match, carry out the following adjustment procedures.


Hide 2.ADJUST SHIFT LEVER POSITION

a.

Move the shift lever to the N position.


b.
C155901E06
1.01,1.021 0.844,0.135 0.844,0.135 0.948,0.135 false 1.573,1.167 1.708,1.896 1.708,1.896 1.813,1.896 true 1,0.042 1.729,0.219 0.729,0.177 10 false Lock Piece 1.854,1.802 2.313,2 0.458,0.198 10 false Slider

Fold back the transmission control cable adjust case cover. Then while sliding the slider toward the cable end side, press the lock piece from the back side to release the lock.


c.
C155902E07
0.969,1.156 0.781,0.156 0.781,0.156 0.885,0.156 false 1.51,1.188 1.646,1.927 1.646,1.927 1.75,1.927 true 0.938,0.052 1.667,0.229 0.729,0.177 10 false Lock Piece 1.792,1.833 2.25,2.031 0.458,0.198 10 false Slider

Check that the adjust case's spring is applying enough tension to the shift control cable. Then press the lock piece to set the lock.

NOTICE:
·

Use your hand to push the lock piece. Do not use any tools.

·

Securely push the lock piece so that the slider's protrusion is above the lock piece.




d.

Return the cover of the adjust case to its original position.


e.

Inspect the operation after the adjustment.