Home › Drivetrain › AB60E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY(for Column Shift Type)
RM27M0U _52 Drivetrain _049126 AB60E AUTOMATIC TRANSMISSION / TRANSAXLE _0234151 SHIFT LEVER ASSEMBLY(for Column Shift Type) A

AB60E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY(for Column Shift Type)  REMOVAL  


PROCEDURE

Hide 84140 1.REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY

Hide 2.REMOVE COLUMN SHIFT ASSEMBLY

a.

Move the shift lever to the N position.


b.
C155885

Disconnect the column shift transmission control cable end from the column shift.


c.
C155886

Disconnect the connector and detach the harness clamp.


d.

Using a T30 "TORX" wrench, remove the 3 bolts and column shift.