85903
1.INSTALL SHIFT LOCK CONTROL ECU
Attach the 3 claws to install the shift lock control ECU to the shift lever assembly.
Connect the shift lock solenoid connector.
35959A
2.INSTALL POSITION INDICATOR LED
Attach the claw to install the position indicator LED to the lower position indicator housing.
35906
3.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
Connect the connector and install the indicator light wire sub-assembly to the lower position indicator housing.
35974
4.INSTALL LOWER POSITION INDICATOR HOUSING
Attach the 4 claws to install the lower position indicator housing to the shift lever assembly.
35906
5.CONNECT INDICATOR LIGHT WIRE SUB-ASSEMBLY
Attach the 4 guides.
Securely connect the 2 wire terminals to terminals 4 (ILL+) and 8 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.
| *1 | Connector Housing Retainer |
| *a | Component without harness connected
(Transmission Control Switch) |
35976
6.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER
Install the No. 2 position indicator slide cover to the position indicator slide cover.
35975
7.INSTALL POSITION INDICATOR SLIDE COVER
Install the position indicator slide cover with the No. 2 position indicator slide cover to the shift lever assembly.
Install the position indicator slide cover so that its mark faces the vehicle front.
35971A
8.INSTALL UPPER POSITION INDICATOR HOUSING
Attach the 4 claws to install the upper position indicator housing to the shift lever assembly.
33554
9.INSTALL SHIFT LEVER CAP
Attach the 2 claws to install the shift lever cap to the shift lever assembly.