Home › Drivetrain › A760E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY(for Column Shift Type)
RM27M0U _52 Drivetrain _049128 A760E AUTOMATIC TRANSMISSION / TRANSAXLE _0234183 SHIFT LEVER ASSEMBLY(for Column Shift Type) A

A760E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY(for Column Shift Type)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL COLUMN SHIFT ASSEMBLY

C155886

a.

Using a T30 "TORX" wrench, install the column shift with the 3 bolts.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)


b.

Connect the connector and attach the harness clamp.


c.
U152181E02
0.375,0.917 0.188,0.156 0.188,0.156 0.281,0.156 false 0.333,0.094 1.146,0.271 0.813,0.177 10 false Ridged Side

Connect the column shift transmission control cable end to the column shift.

NOTICE:

Make sure to connect the cable end so that the inner cable is not twisted. Confirm that the ridged side of the cable end is facing upward.



Hide 84140 3.INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY