Home › Drivetrain › A760E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY(for Column Shift Type)
RM27M0U _52 Drivetrain _049128 A760E AUTOMATIC TRANSMISSION / TRANSAXLE _0234183 SHIFT LEVER ASSEMBLY(for Column Shift Type) A

A760E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY(for Column Shift Type)  DISASSEMBLY  


PROCEDURE

Hide 33580 1.REMOVE COLUMN SHIFT SHIFTING BELLCRANK ASSEMBLY

C155887

a.

Remove the bolt and shifting bellcrank from the column shift control shift lever retainer.


Hide 33541G 2.REMOVE COLUMN SHIFT LEVER COMPRESSION SPRING

C155888

a.

Remove the bolt and spring from the column shift control shift lever retainer.


Hide 33502Q 3.REMOVE SHIFT LEVER PLATE SUB-ASSEMBLY

C155893

a.

Disconnect the transmission control switch connector clamp from the column shift.


b.

Detach the wire harness clamp and cut off the 4 wire guides.


c.
C157032

Remove the 3 bolts.


d.
C155890

Remove the shift lever plate from the column shift control shift lever retainer.


Hide 33564A 4.REMOVE COLUMN SHIFT SHIFT LOCK RELEASE LINK

C155891

a.

Remove the shift lock release link and spring from the shift lever plate.


Hide 33503 5.REMOVE COLUMN SHIFT SHIFT LEVER SUB-ASSEMBLY

C155892

a.

Remove the shift lever and 2 lever selecting bushes from the column shift control shift lever retainer.


b.
C351972E01
1.75,1.458 2.469,0.927 2.469,0.927 2.615,0.927 true 1.573,1.448 0.885,0.927 0.885,0.927 0.729,0.927 true 1.083,2.313 1.625,1.823 true 1.76,2.333 1.771,1.813 true 2.458,2.271 2.073,1.813 true 1.594,3.375 1.177,3.042 1.177,3.042 1.042,3.042 true 1.51,4.292 1.365,4.292 1.365,4.292 1.229,3.948 true 0.115,0.063 2.583,0.427 2.469,0.365 10 false Component without harness connected: (Transmission Control Switch) 0.333,0.854 0.844,1.01 0.51,0.156 10 false SFTU 2.656,0.844 3.167,1 0.51,0.156 10 false SFTD 2.448,2.323 2.958,2.479 0.51,0.156 10 false E* 1.74,2.365 2.25,2.521 0.51,0.156 10 false E 1.021,2.333 1.531,2.49 0.51,0.156 10 false P* 0.042,2.531 1.885,2.74 1.844,0.208 10 false * w/ Trailer Towing System 0.26,2.927 1.167,3.104 0.906,0.177 10 false Locking Lug 1.573,4.188 3.385,4.375 1.813,0.188 10 false Connector Housing Retainer

Using a thin-bladed screwdriver, release the connector housing retainer.


c.

w/o Trailer Towing System:

Insert a thin-bladed screwdriver, release the locking lug of terminal 4 (SFTD), 5 (SFTU) and 11 (E), and pull the terminals out from the rear.


d.

w/ Trailer Towing System:

Insert a thin-bladed screwdriver, release the locking lug of terminal 4 (SFTD), 5 (SFTU), 12 (P), 9 (E) and 11 (E), and pull the terminals out from the rear.


e.
C155897

Detach the 2 claws and remove the control shaft tube clamp from the column shift control shift lever retainer.


Hide 85431 6.REMOVE SHIFT LOCK SOLENOID

U152169

a.

Detach the 2 claws and remove the shift lock solenoid bracket.


b.
C155894

Remove the screw, collar, 2 bushes and shift lock solenoid with No. 1 shift lock plate sub-assembly from the column shift control shift lever retainer.


c.
C351973E01
2.156,1.354 2.552,0.99 2.552,0.99 2.708,0.99 true 2.177,1.656 2.177,2.281 true 1.125,3.01 1.25,3.01 1.25,3.01 1.333,3.521 true 0.979,4.083 1.125,4.365 1.125,4.365 1.26,4.365 true 0.073,0.094 2.5,0.458 2.427,0.365 10 false Component without harness connected: (Transmission Control Switch) 2.771,0.906 3.219,1.083 0.448,0.177 10 false SLS+ 2.156,2.344 2.469,2.531 0.313,0.188 10 false E 0.333,2.906 1.208,3.094 0.875,0.188 10 false Locking Lug 1.344,4.281 3.104,4.469 1.76,0.188 10 false Connector Housing Retainer

Insert a thin-bladed screwdriver, release the locking lug of terminal 1 (SLS+) and 8 (E), and pull the terminals out from the rear.


Hide 33805A 7.DISCONNECT NO. 1 SHIFT LOCK PLATE SUB-ASSEMBLY

C155900

a.

Using a pin-punch and hammer, tap out the spring pin and disconnect the shift lock plate from the shift lock solenoid.


Hide 84722F 8.REMOVE TRANSMISSION CONTROL SWITCH (S POSITION)

C155898

a.

Remove the 2 screws and switch from the column shift control shift lever retainer.


b.
C351973E02
0.75,1.021 0.927,1.021 0.927,1.021 1.406,1.365 true 0.969,2.292 1.146,2.292 1.146,2.292 1.396,1.677 true 1.063,2.938 1.24,2.938 1.24,2.938 1.323,3.51 true 1.281,4.333 1.156,4.333 1.156,4.333 1.031,4.083 true 0.073,0.031 2.531,0.365 2.458,0.333 10 false Component without harness connected: (Transmission Control Switch) 0.563,0.938 0.781,1.115 0.219,0.177 10 false IG 0.844,2.198 1.063,2.375 0.219,0.177 10 false S 0.271,2.844 1.073,3.021 0.802,0.177 10 false Locking Lug 1.375,4.25 3.156,4.427 1.781,0.177 10 false Connector Housing Retainer

Insert a thin-bladed screwdriver, release the locking lug of terminal 6 (IG) and 13 (S), and pull the terminals out from the rear.


Hide 84722F 9.REMOVE TRANSMISSION CONTROL SWITCH (P POSITION)

C155899

a.

Remove the 2 screws and switch from the column shift control shift lever retainer.