35410
1.INSTALL TRANSMISSION VALVE BODY ASSEMBLY
Install the spring and check ball body.
Align the hole of the manual valve with the pin of the lever and connect the pin to the manual valve.
Install the valve body with the 19 bolts.
Each bolt length is indicated below.
36 mm (1.42 in.) for bolt A
25 mm (0.984 in.) for bolt B
45 mm (1.77 in.) for bolt C
50 mm (1.97 in.) for bolt D
Install the detent spring and detent spring cover with the bolt.
82125J
2.CONNECT TRANSMISSION WIRE
35330
3.INSTALL VALVE BODY OIL STRAINER ASSEMBLY
35106
4.INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
5.ADD AUTOMATIC TRANSMISSION FLUID
Add automatic transmission fluid (See page Drivetrain>A760E AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSMISSION FLUID>ADJUSTMENT).