Home › Drivetrain › A760E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM
RM27M0U _52 Drivetrain _049128 A760E AUTOMATIC TRANSMISSION / TRANSAXLE _0234192 AUTOMATIC TRANSMISSION SYSTEM U

A760E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  TERMINALS OF ECM  


CHECK ECM


U152372E02
2.323,0.281 2.698,0.51 0.375,0.229 10 false D74 5.542,0.281 5.917,0.51 0.375,0.229 10 false A24

HINT:

The standard voltage at each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to inspect. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
D74-120 (NSW) - D74-81 (E1) L - BR PNP switch signal
·

Ignition switch ON

·

Shift lever in P or N


Below 1 V
·

Ignition switch ON

·

Shift lever not in P or N


11 to 14 V
D74-2 (P) - D74-81 (E1) G-B - BR P shift position switch signal
·

Ignition switch ON

·

Shift lever in P


11 to 14 V
·

Ignition switch ON

·

Shift lever not in P


Below 1 V
D74-26 (R) - D74-81 (E1) L-R - BR R shift position switch signal
·

Ignition switch ON

·

Shift lever in R


11 to 14 V
·

Ignition switch ON

·

Shift lever not in R


Below 1 V
D74-25 (N) - D74-81 (E1) G-W - BR N shift position switch signal
·

Ignition switch ON

·

Shift lever in N


11 to 14 V
·

Ignition switch ON

·

Shift lever not in N


Below 1 V
D74-27 (D) - D74-81 (E1) G - BR D shift position switch signal
·

Ignition switch ON

·

Shift lever in D


11 to 14 V
·

Ignition switch ON

·

Shift lever not in D


Below 1 V
A24-25 (S) - D74-81 (E1) Y - BR S shift position switch signal
·

Ignition switch ON

·

Shift lever in S


11 to 14 V
·

Ignition switch ON

·

Shift lever not in S


Below 1 V
A24-38 (SFTU) - D74-81 (E1) G - BR Up-shift position switch signal
·

Ignition switch ON

·

Shift lever in S


11 to 14 V
·

Ignition switch ON

·

Shift lever in "+" (up-shift)


Below 1 V
A24-27 (SFTD) - D74-81 (E1) BE - BR Down-shift position switch signal
·

Ignition switch ON

·

Shift lever in S


11 to 14 V
·

Ignition switch ON

·

Shift lever in "-" (down-shift)


Below 1 V
D74-7 (S1) - D74-81 (E1) R - BR S1 solenoid signal 1st gear Below 1 V
Not in 1st gear 11 to 14 V
D74-6 (S2) - D74-81 (E1) W - BR S2 solenoid signal 1st, 2nd or 6th gear 11 to 14 V
3rd, 4th or 5th gear Below 1 V
D74-3 (S3) - D74-81 (E1) G-W - BR S3 solenoid signal 1st, 2nd or 3rd gear 11 to 14 V
4th, 5th or 6th gear Below 1 V
D74-5 (S4) - D74-81 (E1) G-R - BR S4 solenoid signal 5th or 6th gear 11 to 14 V
1st, 2nd, 3rd or 4th gear Below 1 V
D74-4 (SR) - D74-81 (E1) G - BR SR solenoid signal 1st, 2nd, 3rd or 4th gear 11 to 14 V
5th or 6th gear Below 1 V
D74-14 (SL1+) - D74-15 (SL1-) Y - L SL1 solenoid signal 5th or 6th gear Pulse generation
D74-12 (SL2+) - D74-13 (SL2-) G-R - L-W SL2 solenoid signal Engine is idling Pulse generation
D74-9 (SLT+) - D74-8 (SLT-) B - G-B SLT solenoid signal Engine is idling Pulse generation
D74-10 (SLU+) - D74-11 (SLU-) L-Y - L-R SLU solenoid signal 5th gear (lock-up) or 6th gear (lock-up) Pulse generation
D74-122 (THO1) - D74-98 (E2) G-Y - BR No. 1 ATF temperature sensor signal No. 1 ATF temperature: 115°C (239°F) or more Below 1.5 V
D74-99 (THO2) - D74-98 (E2) L - BR No. 2 ATF temperature sensor signal No. 2 ATF temperature: 115°C (239°F) or more Below 1.5 V
D74-101 (SP2+) - D74-100 (SP2-) Y - B Speed sensor SP2 signal Vehicle speed 20 km/h (12 mph) Pulse generation
(see waveform 1)
D74-124 (NT+) - D74-123 (NT-) Y - B Speed sensor NT signal Engine idling
(shift lever in P or N)
Pulse generation
(see waveform 2)
A24-10 (CANH) - D74-81 (E1) GR - BR CAN communication line Ignition switch ON Pulse generation
(see waveform 3)
A24-11 (CANL) - D74-81 (E1) W - BR CAN communication line Ignition switch ON Pulse generation
(see waveform 4)

a.
C161208E04
2.708,0.097 3.293,0.298 0.585,0.201 10 2 V/DIV. 2.996,0.904 3.348,1.106 0.352,0.202 10 GND 1.541,1.688 2.440,1.883 0.900,0.195 10 20 msec./DIV.

Using an oscilloscope, check waveform 1.

Reference
Terminal No. (Symbol) Tool Setting Condition
D74-101 (SP2+) - D74-100 (SP2-) 2 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)


b.
C162170E03
2.707,0.097 3.292,0.298 0.585,0.201 10 1 V/DIV. 2.995,0.904 3.347,1.106 0.352,0.202 10 GND 1.637,1.688 2.453,1.883 0.816,0.195 10 2 msec./DIV.

Using an oscilloscope, check waveform 2.

Reference
Terminal No. (Symbol) Tool Setting Condition
D74-124 (NT+) - D74-123 (NT-) 1 V/DIV., 2 msec./DIV. Engine idling (shift lever in P or N)


c.
C161206E03
2.707,0.095 3.293,0.296 0.585,0.201 10 1 V/DIV. 1.591,1.687 2.449,1.882 0.858,0.195 10 10 μsec./DIV. 2.993,1.361 3.345,1.563 0.352,0.202 10 GND

Using an oscilloscope, check waveform 3.

Reference
Terminal No. (Symbol) Tool Setting Condition
A24-10 (CANH) - D74-81 (E1) 1 V/DIV., 10 μsec./DIV. Ignition switch ON


d.
C161207E03
2.705,0.093 3.290,0.294 0.585,0.201 10 1 V/DIV. 1.589,1.685 2.447,1.880 0.858,0.195 10 10 μsec./DIV. 2.991,1.359 3.343,1.561 0.352,0.202 10 GND

Using an oscilloscope, check waveform 4.

Reference
Terminal No. (Symbol) Tool Setting Condition
A24-11 (CANL) - D74-81 (E1) 1 V/DIV., 10 μsec./DIV. Ignition switch ON