Home › Steering › POWER STEERING › VANE PUMP(for 1UR-FE)
RM27M0U _55 Steering _049130 POWER STEERING _0234202 VANE PUMP(for 1UR-FE) A

POWER STEERING  VANE PUMP(for 1UR-FE)  DISASSEMBLY  


PROCEDURE

Hide 44320 1.FIX VANE PUMP ASSEMBLY

a.
C181329E01
1.44,1.538 0.907,1.541 false 0.542,1.459 0.965,1.643 0.422,0.184 10 SST

Using SST, hold the vane pump in a vise.

SST
09630-00014  (09631-00132)


Hide 44337 2.REMOVE POWER STEERING SUCTION PORT UNION

a.
C181330

Remove the bolt and suction port union from the vane pump.


b.

Using a screwdriver, remove the O-ring from the suction port union.


Hide 44330 3.REMOVE FLOW CONTROL VALVE ASSEMBLY

a.
C210753

Remove the pressure port union.


b.

Remove the O-ring from the pressure port union.


c.

Remove the flow control valve and compression spring.


Hide 4.REMOVE VANE PUMP REAR HOUSING

a.
C131230

Remove the 4 bolts and rear housing from the front housing.


b.
C107025E06
2.008,0.196 2.202,0.383 0.194,0.187 10 *a 1.974,0.282 1.69,0.282 1.69,0.282 1.276,1.15 false

Using a screwdriver, remove the O-ring from the rear housing.

Text in Illustration
*a Protective Tape

HINT:

Tape the screwdriver tip before use.



Hide 44303A 5.REMOVE VANE PUMP SHAFT SUB-ASSEMBLY WITH PULLEY

a.
C131231

Using 2 screwdrivers, remove the snap ring from the vane pump shaft.


b.

Remove the vane pump shaft sub-assembly with pulley.

NOTICE:

Be careful not to drop or damage the vane pump shaft sub-assembly with pulley. If it is damaged, replace the vane pump assembly.



Hide 6.REMOVE VANE PUMP ROTOR

a.
C114697

Remove the 10 vane plates.

NOTICE:

Take care not to drop the vane plate.



b.

Remove the vane pump rotor.


Hide 7.REMOVE VANE PUMP CAM RING

a.
C114698

Remove the cam ring from the front housing.


Hide 8.REMOVE VANE PUMP FRONT SIDE PLATE

a.
C114699

Remove the front side plate from the front housing.


b.
C107029E06
1.97,0.08 2.232,0.254 0.262,0.174 10 *a 1.907,0.16 1.724,0.16 1.724,0.16 1.26,0.83 false

Using a screwdriver, remove the O-ring from the front side plate.

Text in Illustration
*a Protective Tape

HINT:

Tape the screwdriver tip before use.



c.
C114700

Remove the O-ring from the front housing.


Hide 9.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C114701E05
2.2,0.168 2.574,0.328 0.373,0.161 10 *a 1.927,0.558 2.051,0.253 2.051,0.253 2.163,0.253 false

Using a screwdriver and piece of cloth, pry out the oil seal.

Text in Illustration
*a Cloth

NOTICE:

Be careful not to damage the front housing.