The center airbag sensor assembly consists of the deceleration sensor, the safing sensor, the drive circuit, the diagnostic circuit, the ignition control, etc.
If the center airbag sensor assembly receives signals from the airbag sensor, it determines whether the airbags should be deployed and pretensioner squibs activated.
DTC B1000/31 is stored when a malfunction is detected in the center airbag sensor assembly.
| DTC Code | Detection Condition | Trouble Area |
|---|---|---|
| B1000/31 | Center airbag sensor assembly malfunction | Center airbag sensor assembly |
Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1000/31 is output (for Column Shift Type) | A |
| DTC B1000/31 is output (for Floor Shift Type) | B |
| DTC B1000/31 and other DTCs are output | C |
If only DTC B1000/31 is output, do not clear the DTCs, replace the center airbag sensor assembly.
If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.
C
(See pageVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSTIC TROUBLE CODE CHART)
A
B