Home › Vehicle Interior › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY(for Double Cab)
RM27M0U _58 Vehicle Interior _049132 SEAT BELT _0234229 FRONT SEAT OUTER BELT ASSEMBLY(for Double Cab) G

SEAT BELT  FRONT SEAT OUTER BELT ASSEMBLY(for Double Cab)  INSPECTION  


PROCEDURE

Hide 73220 1.INSPECT FRONT SEAT OUTER BELT ASSEMBLY

B166611E02
1.094,0.156 1.688,0.375 0.594,0.219 10 false 45°

CAUTION:

Do not disassemble the retractor.


a.

Before installing the seat belt, check the ELR.

i.

When the inclination of the retractor is 15° or less from its installed position, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45° from its installed position, check that the belt locks. If the operation is not as specified, replace the seat belt assembly.



b.

for Passenger's Seat only:

Check the fastening function of the child restraint system.

NOTICE:

The check should be performed with the outer belt installed.


i.

When the belt is pulled out fully, the belt should automatically start to retract.


ii.

After the belt has fully retracted, the belt should be able to be pulled out and retracted again.

If the operation is not as specified, replace the belt assembly.