73390C
1.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
Attach the guide.
Tighten the bolt to install the rear No. 1 seat inner belt assembly LH.
Pull the No. 1 reclining adjuster release handle LH and fold down the seat cushion.
73380C
2.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
Attach the guide.
Tighten the bolt to install the rear No. 1 seat inner belt assembly RH.
Pull the No. 1 reclining adjuster release handle RH and fold down the seat cushion.
73390A
3.INSTALL REAR SEAT INNER BELT ASSEMBLY
Pass the rear seat inner belt assembly through the rubber band of the separate type rear seatback cover in the direction indicated by the arrow shown in the illustration.
| *1 | Rubber Band |
| *2 | Protruding Part |
Install the rear seat inner belt assembly with the bolt.
Be careful not to damage the vehicle body.
Do not allow the anchor of the rear seat inner belt assembly to overlap the protruding part.
Install the rear seat assembly RH with the 4 bolts.
Pull the No. 1 reclining adjuster release handle RH and fold down the seat cushion.