Home › Vehicle Interior › LIGHTING › STOP LIGHT SWITCH
RM27M0U _58 Vehicle Interior _049133 LIGHTING _0234246 STOP LIGHT SWITCH G

LIGHTING  STOP LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

E344879E01
1.625,2.854 1.938,3.052 0.313,0.198 10 false *a 2.271,2.177 2.583,2.375 0.313,0.198 10 false *b 2.281,2.563 2.594,2.76 0.313,0.198 10 false *c

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pushed 10 kΩ or higher
Not pushed Below 1 Ω
3 - 4 Pushed Below 1 Ω
Not pushed 10 kΩ or higher


If the result is not as specified, replace the stop light switch assembly.

Text in Illustration
*a Component without harness connected
(Stop Light Switch Assembly)
*b Pushed
*c Not pushed