55900
1.INSPECT AIR CONDITIONING CONTROL ASSEMBLY (HAZARD WARNING SWITCH)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 (HAZ) - 5 (GND) | Hazard warning switch off | 10 kΩ or higher |
| Hazard warning switch on | Below 1 Ω |
If the result is not as specified, replace the air conditioning control assembly (hazard warning switch).
| *a | Component without harness connected
(Air Conditioning Control Assembly (Hazard Warning Switch)) |