Home › Vehicle Interior › LIGHTING › HEADLIGHT DIMMER SWITCH
RM27M0U _58 Vehicle Interior _049133 LIGHTING _0234248 HEADLIGHT DIMMER SWITCH G

LIGHTING  HEADLIGHT DIMMER SWITCH  INSPECTION  


PROCEDURE

Hide 84140 1.INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY

E139363E58
1.01,1.51 0.531,1.396 true 2.229,1.469 2.833,1.135 true 1.448,1.938 1.344,1.552 true 1.104,1.917 1.208,1.552 true 2.854,1.042 3.146,1.208 0.292,0.167 10 false EL 1.406,1.958 1.583,2.135 0.177,0.177 10 false T 0.073,0 0.292,0.198 0.219,0.198 10 false *a 0.385,1.313 0.677,1.49 0.292,0.177 10 false H 1.021,1.938 1.219,2.156 0.198,0.219 10 false A

a.

Inspect the light control switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
20 (H) - 12 (EL) Light control switch off 10 kΩ or higher
18 (T) - 12 (EL)
19 (A) - 12 (EL)
18 (T) - 12 (EL) Light control switch tail Below 1 Ω
18 (T) - 12 (EL) Light control switch head Below 1 Ω
20 (H) - 12 (EL)
19 (A) - 12 (EL) Light control switch auto Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



b.
E139363E59
1.5,1.531 1.188,1.927 true 2.229,1.469 2.833,1.146 true 2.323,1.927 2.396,1.552 true 1.646,1.458 1.375,0.594 true 2.854,1.031 3.146,1.198 0.292,0.167 10 false EL 2.219,1.938 2.49,2.115 0.271,0.177 10 false HU 0.073,0 0.302,0.25 0.229,0.25 10 false *a 1.271,0.438 1.563,0.615 0.292,0.177 10 false HL 1.031,1.927 1.323,2.104 0.292,0.177 10 false HF

Inspect the headlight dimmer switch.

i.

Measure the resistance according to the value(s) in the table below.

HINT:

Perform the flash, high beam and low beam inspections with the light control switch on head.


Standard Resistance:
Tester Connection Switch Condition Specified Condition
11 (HU) - 12 (EL) Headlight dimmer switch flash Below 1 Ω
17 (HF) - 12 (EL)
11 (HU) - 12 (EL) Headlight dimmer switch hi beam Below 1 Ω
16 (HL) - 12 (EL) Headlight dimmer switch low beam Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



c.
E139363E44
2.889,1.025 3.174,1.190 0.285,0.165 10 EL 0.072,0.044 2.612,0.399 2.540,0.355 10 *a 2.156,0.422 2.384,0.603 0.228,0.181 10 TR 1.374,0.424 1.553,0.606 0.179,0.181 10 TL 2.085,1.484 2.246,0.62 false 1.789,1.466 1.481,0.605 false 2.243,1.48 2.859,1.141 false

Inspect the turn signal switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
13 (TR) - 12 (EL) Turn signal switch right turn Below 1 Ω
13 (TR) - 12 (EL) Turn signal switch right lane change Below 1 Ω
13 (TR) - 12 (EL) Turn signal switch neutral 10 kΩ or higher
15 (TL) - 12 (EL)
15 (TL) - 12 (EL) Turn signal switch left lane change Below 1 Ω
15 (TL) - 12 (E) Turn signal switch left turn Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



d.
E139363E45
0.072,0.044 2.612,0.399 2.540,0.355 10 *a 2.156,0.422 2.523,0.603 0.367,0.181 10 LFG 1.305,0.424 1.670,0.606 0.364,0.181 10 BFG 2.099,1.298 2.246,0.62 false 1.915,1.302 1.481,0.605 false

Inspect the front fog light switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (LFG) - 4 (BFG) Front fog light switch off 10 kΩ or higher
3 (LFG) - 4 (BFG) Front fog light switch on Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)