85916D
1.INSPECT FOG LIGHT RELAY
Remove the fog light relay from the engine room relay box.
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage not applied to terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage applied to terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the fog light relay.
Install the fog light relay to the engine room relay box.