85916P
1.INSPECT HEADLIGHT RELAY
Remove the headlight relay from the engine room relay box.
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage not applied to terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage applied to terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the headlight relay.
Install the headlight relay to the engine room relay box.