Home › Vehicle Interior › LIGHTING › ROOM LIGHT SWITCH
RM27M0U _58 Vehicle Interior _049133 LIGHTING _0234260 ROOM LIGHT SWITCH G

LIGHTING  ROOM LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 84170 1.INSPECT INTERIOR ROOM LIGHT SWITCH ASSEMBLY

E281396E03
1.271,1.25 1.031,1.74 true 1.917,1.26 1.792,1.74 true 2.385,1.25 2.469,1.75 true 0.063,0 0.344,0.219 0.281,0.219 10 false *a 2.344,1.802 2.854,2.01 0.51,0.208 10 false FCTY 0.75,1.802 1.26,2.01 0.51,0.208 10 false FLMP 1.719,1.802 1.969,2.031 0.25,0.229 10 false E

a.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
6 (FCTY) - 11 (FLMP) Interior room light switch DOOR Below 1 Ω
11 (FLMP) - 8 (E) Interior room light switch ON Below 1 Ω


If the result is not as specified, replace the interior room light switch assembly.

Text in Illustration
*a Component without harness connected
(Interior Room Light Switch Assembly)



b.
E281396E02
0.059,0.041 0.367,0.349 0.309,0.309 10 *a 2.456,0.273 2.876,0.609 0.420,0.336 10 ILL+ 0.961,0.234 1.381,0.570 0.420,0.336 10 ILL- 1.248,0.917 1.116,0.419 false 2.412,0.925 2.551,0.466 false

Check the illumination.

i.

Apply battery voltage to the connector and check the illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1 (ILL+)
Battery negative (-) → Terminal 4 (ILL-)
Illuminates


If the result is not as specified, replace the interior room light switch assembly.

Text in Illustration
*a Component without harness connected
(Interior Room Light Switch Assembly)