81260C
1.REMOVE MAP LIGHT BULB
Use the same procedure for both map light bulbs.
Put protective tape around the map light lens.
| *1 | Protective Tape |
Using a screwdriver, detach the 2 claws and guide and remove the map light lens.
Tape the screwdriver tip before use.
| *2 | Tape |
Using a screwdriver, push out the map light bulb from the back of the roof console box and remove the map light bulb.
Take care not to deform brass bulb holders.
Tape the screwdriver tip before use.
| *1 | Tape |
84249
2.REMOVE MAP LIGHT SWITCH
Use the same procedure for both map light switches.
Remove the map light switch from the roof console box.