82642B
1.INSPECT NO. 1 DAY TIME RUNNING LIGHT RELAY
Remove the No. 1 day time running light relay from the engine room relay box.
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage not applied to terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage applied to terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the No. 1 day time running light relay.
Install the No. 1 day time running light relay to the engine room relay box.